Volvo Penta TAMD41 Oil & Filter Change
Fresh oil and a new filter are the cheapest insurance for your Volvo Penta TAMD41. Below is the exact oil filter that fits, a step-by-step video of the full oil change, and what else you need for the job.
Check today’s price on Amazon →
Watch: how to do it (step by step)
How to Replace Oil Filter – volvo_penta AMD41
Volvo Penta TAMD41-P Part1 oil change
Volvo Penta TAMD41-P Oil Filter Replacement Guide
Tools Needed
- Suitable oil filter wrench
- Socket wrench (for removing injectors and rocker cover)
- Oil extractor pump
- Plastic bag (to catch oil filter and residue)
Safety
- Always warm the engine up before starting any maintenance work.
- Be cautious when handling hot components.
Steps
- Warm up the engine to facilitate oil flow.
- Locate the oil dipstick, remove it, and clean it.
- Connect the oil extractor pump's tube to the oil dipstick hole.
- Start pumping out the old oil into a suitable container until no more oil comes out.
- Release the pressure from the oil extractor pump.
- Clean up any oil spills around the engine area.
- Locate the oil filter, which is underneath the heat exchanger and oil pump housing.
- Using an oil filter wrench, loosen and remove the old oil filter by turning it counterclockwise.
- Clean the oil filter mounting surface on the engine block to prevent any debris from entering the new filter.
- Lubricate the gasket of the new oil filter with a small amount of new engine oil.
- Hand-tighten the new oil filter onto the engine by turning it clockwise until it's snug, then give it about ¼ to ½ turn more (do not overtighten).
- Reinstall any removed components, such as injectors and rocker covers.
Tips
- Always use an oil that is approved by the manufacturer for your specific engine.
- Dispose of used oil responsibly at a local recycling center or hazardous waste facility.
- Consider changing the fuel filter and cleaning the seawater side of the engine during this maintenance session.
Which part do I need for my Volvo Penta TAMD41?
For most TAMD41 owners the part above (18-7926) is the right choice. Price tip: the aftermarket numbers are usually noticeably cheaper than the OEM-branded box — it is the same physical part. If you need an exact match, these compatible part numbers also fit:
Show all compatible part numbers (1)
| Part number | Description | |
|---|---|---|
| Caterpillar 1R-0714 | Oil filter | Find on Amazon → |
Many of these are the same physical part under different brand numbers. Confirm against your engine plate before ordering.
Frequently asked questions
What oil filter fits a Volvo Penta TAMD41?
The Volvo Penta TAMD41 uses the oil filter sold as 18-7926, plus its OEM and aftermarket cross-references (1 compatible numbers are listed above). Confirm the number against your engine's model code and year plate before ordering.
How often should I replace the oil filter on a Volvo Penta TAMD41?
Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).
What else do I need for an oil change on a Volvo Penta TAMD41?
The correct grade and amount of engine oil (see the manual or the video), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.
What are the signs the oil is overdue on a Volvo Penta TAMD41?
Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.
How long does an oil change take on a Volvo Penta TAMD41?
About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.
Related guides
- Volvo Penta D4 oil filter
- Volvo Penta TAMD63 oil filter
- Volvo Penta KAD300 oil filter
- Volvo Penta KAD42 oil filter
- All Volvo Penta maintenance guides
- Free Volvo Penta boat valuation
As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.