Volvo Penta D2-55 Oil & Filter Change
Fresh oil and a new filter are the cheapest insurance for your Volvo Penta D2-55. Below is the exact oil filter that fits, a step-by-step video of the full oil change, and what else you need for the job.
Check today’s price on Amazon →
Watch: how to do it (step by step)
How to Replace Oil Filter – volvo_penta D2
How to change the oil on a Volvo Penta D2-55 diesel engine – Carl and Jenny
Tools Needed
- Oil drain plug wrench
- Oil filter wrench
- Funnel
- Gloves
- Oil catch pan or container
- New oil filter
- Engine oil (not specified, use appropriate type for Volvo Penta D2-55)
Safety
- Ensure engine is warm but not hot to avoid burns.
- Have a suitable container ready to dispose of used oil in an eco-friendly manner.
Steps
- Warm up the engine by running it briefly.
- Locate and remove the dipstick, then use it with a pump to drain the old oil from the engine.
- Identify and locate the oil drain plug at the bottom of the engine.
- Place an oil catch pan or container underneath the drain plug.
- Using the oil drain plug wrench, loosen and remove the drain plug by turning it counterclockwise.
- Allow the old oil to drain completely from the engine.
- Once drained, wipe the area around the oil filter with a cloth to remove any debris or oil residue.
- Locate the oil filter and use an oil filter wrench to loosen and remove it by turning it counterclockwise.
- Before installing the new oil filter, lightly coat its rubber gasket with clean engine oil.
- Hand-tighten the new oil filter onto the engine by turning it clockwise until it is snug, then give it a final turn by hand (usually about ¼ to ⅔ of a turn).
- Replace and tighten the oil drain plug by hand, ensuring it is securely fastened but not overtightened.
- Using a funnel, pour the recommended amount of new engine oil into the engine through the oil fill hole.
- Allow the oil to settle for a few minutes, then check the oil level using the dipstick.
- Add more oil if necessary, ensuring it is within the recommended range on the dipstick.
- Reset the maintenance interval indicator on the engine control panel (if applicable).
- Run the engine briefly and check for any leaks around the oil drain plug and oil filter.
Tips
- Be patient when draining the old oil; it may take several minutes to completely drain from the engine.
- Ensure the new oil filter is properly seated and hand-tightened to prevent leaks and ensure proper sealing.
- Dispose of used oil and filter responsibly, following local regulations for recycling or disposal.
Which part do I need for my Volvo Penta D2-55?
For most D2-55 owners the part above (384052) is the right choice.
Frequently asked questions
What oil filter fits a Volvo Penta D2-55?
The Volvo Penta D2-55 uses the oil filter sold as 384052. Confirm the number against your engine's model code and year plate before ordering.
How often should I replace the oil filter on a Volvo Penta D2-55?
Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).
What else do I need for an oil change on a Volvo Penta D2-55?
The correct grade and amount of engine oil (see the manual or the video), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.
What are the signs the oil is overdue on a Volvo Penta D2-55?
Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.
How long does an oil change take on a Volvo Penta D2-55?
About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.
Related guides
- Volvo Penta D4 oil filter
- Volvo Penta TAMD63 oil filter
- Volvo Penta KAD300 oil filter
- Volvo Penta KAD42 oil filter
- All Volvo Penta maintenance guides
- Free Volvo Penta boat valuation
As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.