Volvo Penta D2-55 Oil & Filter Change
Fresh oil and a new filter are the cheapest insurance for your Volvo Penta D2-55. Below is the oil filter we recommend, which D2-55 variants it fits, a step-by-step video of the full oil change, and what else you need for the job.
Check today’s price on Amazon →
Watch: how to do it (step by step)
How to replace the oil filter on a Volvo Penta D2-55
Volvo Penta D2-55 : How to change oil and filter, ⛵ S/Y ELIZA S01:E01 ⛵
Volvo Penta D2-55 Oil and Filter Change Guide
Tools Needed
- Electric oil pump (e.g., Ultimate Speed)
- Empty container for used oil (e.g., large jelly can)
- New oil filter
- Volvo Penta original engine oil (9.5 liters, 2.2 liters capacity)
- Plastic bag
Safety
- Ensure the engine is cool before starting any work.
- Be prepared for oil spills and have rags or towels nearby.
Steps
- Connect the electric oil pump to the engine's sump, ensuring it reaches the bottom of the tank.
- Pump out all the old oil into a suitable container.
- Place a plastic bag around the oil filter to catch any dripping oil.
- Unscrew and remove the oil filter once it's free from the engine block.
- Clean the oil filter mounting area to ensure no old oil remains.
- Apply a small amount of new oil on the oil filter's rubber gasket and threads.
- Screw on the new oil filter by hand, turning it clockwise until it's snug (about 1/4 to 3/4 of a turn).
- Pour in the recommended amount of new oil (9.5 liters for Volvo Penta D2-55) through the engine's fill hole.
- Allow the oil to settle and check the dipstick after a few minutes.
- Start the engine, let it run briefly, then turn it off and allow it to cool down before rechecking the oil level.
Tips
- Always use Volvo Penta original engine oil for optimal performance and longevity of your engine.
- After changing the oil, monitor the dipstick closely as the oil level may drop slightly once the engine is running due to the oil filter filling up.
Which part do I need for my Volvo Penta D2-55?
For most D2-55 owners the part above (3840525) is the right choice.
Frequently asked questions
What oil filter fits a Volvo Penta D2-55?
The Volvo Penta D2-55 uses the oil filter sold as 3840525. Confirm the number against your engine's model code and year plate before ordering.
How often should I replace the oil filter on a Volvo Penta D2-55?
Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).
What else do I need for an oil change on a Volvo Penta D2-55?
The correct grade and amount of engine oil (see the manual or the video), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.
What are the signs the oil is overdue on a Volvo Penta D2-55?
Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.
How long does an oil change take on a Volvo Penta D2-55?
About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.
Related guides
- Volvo Penta D4 oil filter
- Volvo Penta TAMD63 oil filter
- Volvo Penta KAD300 oil filter
- Volvo Penta KAD42 oil filter
- All Volvo Penta maintenance guides
- Free Volvo Penta boat valuation
As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.