PartsVolvo Penta › KAD43 oil filter · 🇩🇪 Auf Deutsch lesen

Volvo Penta KAD43 Oil & Filter Change

Fresh oil and a new filter are the cheapest insurance for your Volvo Penta KAD43. Below is the exact oil filter that fits, a step-by-step video of the full oil change, and what else you need for the job.

✓ Recommended for the Volvo Penta KAD43
18-7926 — Diesel Oil Filter with Anti-Drain-Back Valve

Check today’s price on Amazon →

✓ Fitment cross-referenced from OEM catalogs · ✓ Step-by-step video above · ✓ Fast Amazon shipping & easy returns — verify your model code before ordering

Watch: how to do it (step by step)

How to Replace Oil Filter – Volvo Penta KAD3-00

Oil Change – Volvo Penta Marine Diesel Kad42 Kad43 Kad44 Kad300

Oil Change Guide for Volvo Penta KAD3-00

Tools Needed

  • Oil extraction pump with pipe
  • Oil filter pliers (oil pump pliers)
  • Strong plastic bag (e.g., rubble sack or clear carrier bag)
  • New oil filter (VOP 43135 for CAD 44, check compatibility for other models)
  • Engine oil (Volvo Penta VDS3 15W40 recommended)

Safety

  • Ensure engines are warm before starting the process to facilitate oil flow.
  • Be cautious when handling hot engine parts and oil.

Steps

  1. Warm up the engine by running it in gear or taking a short drive until it reaches around 85-90°C.
  2. Remove the dipstick from the engine.
  3. Insert the extraction pump pipe through the dipstick hole until it reaches the bottom of the oil pan.
  4. Activate the oil extraction pump, pumping it up and down a few times to create suction and start draining the oil.
  5. Once most of the oil is out, remove the pipe and reposition it to drain any remaining oil.
  6. Loosen the oil filter using oil filter pliers by turning it anti-clockwise until it can be removed by hand.
  7. Place a strong plastic bag around the oil filter to catch any dripping oil, then unscrew the filter by hand and let it drop into the bag.
  8. Wipe the oil filter housing and check that the rubber seal has come off with the old filter.
  9. Fill the new oil filter with engine oil and apply a small amount of oil around the filter's sealing surface.
  10. Screw on the new oil filter by hand, turning it clockwise until it is finger-tight or hand-tight.
  11. Refill the engine with engine oil using the dipstick to monitor the level, adding about 9 liters (or 3/4 of a can) in total for the KAD3-00 engines.

Tips

  • Use a clear plastic bag to easily see any leaks or drips.
  • Ensure the new oil filter is compatible with your specific engine model before purchasing.

Which part do I need for my Volvo Penta KAD43?

For most KAD43 owners the part above (18-7926) is the right choice. Price tip: the aftermarket numbers are usually noticeably cheaper than the OEM-branded box — it is the same physical part. If you need an exact match, these compatible part numbers also fit:

Show all compatible part numbers (1)
Part number Description
Caterpillar 1R-0714 Oil filter Find on Amazon →

Many of these are the same physical part under different brand numbers. Confirm against your engine plate before ordering.

Frequently asked questions

What oil filter fits a Volvo Penta KAD43?

The Volvo Penta KAD43 uses the oil filter sold as 18-7926, plus its OEM and aftermarket cross-references (1 compatible numbers are listed above). Confirm the number against your engine's model code and year plate before ordering.

How often should I replace the oil filter on a Volvo Penta KAD43?

Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).

What else do I need for an oil change on a Volvo Penta KAD43?

The correct grade and amount of engine oil (see the manual or the video), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.

What are the signs the oil is overdue on a Volvo Penta KAD43?

Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.

How long does an oil change take on a Volvo Penta KAD43?

About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.

Ready to fix it?
Get the 18-7926 oil filter for your Volvo Penta KAD43.

Check today’s price on Amazon →

Own a Volvo Penta?
See what your boat is actually worth — instant AI valuation based on thousands of comparable European sales.

Get your free valuation →

Related guides

As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.