Yamaha F225 Oil & Filter Change

Tools Needed

• 14mm socket wrench
• Oil filter wrench (not explicitly mentioned, but implied)

Safety

• Wear gloves to protect your hands from oil and potential injuries.
• Ensure the engine is cool before starting the procedure to prevent burns.

Steps

1. Remove the oil fill cap.
2. Place an oil pan underneath the engine to catch the old oil.
3. Using a 14mm socket wrench, loosen and remove the drain bolt.
4. Extract the old crush washer from the drain bolt.
5. Allow the oil to drain completely.
6. Reinstall the drain bolt and torque it to 19 foot-pounds.
7. Apply a thin layer of new oil around the o-ring of the new oil filter.
8. Install the new oil filter by hand, ensuring the o-ring is properly seated.
9. Torque the oil filter to 13 foot-pounds using an oil filter wrench.
10. Fill the engine with the recommended amount and type of oil (not specified in the video).
11. Replace the oil fill cap.

Tips

• Always replace the crush washer on the drain bolt to ensure a proper seal.
• Apply oil to the o-ring of the new oil filter to lubricate it and prevent damage during installation.
• Torque the drain bolt and oil filter to their specified values to ensure a proper seal and prevent leaks.