PartsYanmar › 3HM35F oil filter · 🇩🇪 Auf Deutsch lesen

Yanmar 3HM35F Oil & Filter Change

Fresh oil and a new filter are the cheapest insurance for your Yanmar 3HM35F. Below is the exact oil filter that fits, a step-by-step video of the full oil change, and what else you need for the job.

✓ Recommended for the Yanmar 3HM35F
18-7917 — Diesel Oil Filter

Check today’s price on Amazon →

✓ Fitment cross-referenced from OEM catalogs · ✓ Step-by-step video above · ✓ Fast Amazon shipping & easy returns — verify your model code before ordering

Watch: how to do it (step by step)

How to Replace Oil Filter – Yanmar 3H M35F

Oilchange on a Yanmar 3HM35F

Tools Needed

  • Oil changing tool with a vacuum and tube
  • Plastic bag (kitchen bag)
  • Paper towels
  • Cup for oil

Safety

  • Ensure the engine is cool before starting the oil change.
  • Be cautious when handling oil to avoid spills.

Steps

  1. Check the dipstick to ensure the engine has the maximum amount of oil.
  2. Run the engine for a while to warm up the oil, making it easier to pump out.
  3. Insert the tube of the oil changing tool into the dipstick hole and start pumping to remove the old oil.
  4. Monitor the oil level and ensure you pump out approximately 5.5 liters of oil.
  5. Loosen the oil filter slightly to check if it is stuck.
  6. Place a plastic bag around the oil filter to collect any oil that might spill out.
  7. Remove the oil filter completely and ensure the oil is collected in the bag.
  8. Clean the oil filter mount using paper towels, ensuring no debris is left behind.
  9. Apply a thin film of oil to the gasket of the new oil filter.
  10. Install the new oil filter and tighten it until it meets resistance, then give it an additional 3/4 turn.
  11. Allow the engine to drain completely from the old oil.
  12. Refill the engine with the recommended amount of new oil, ensuring not to exceed the maximum mark on the dipstick.

Tips

  • Running the engine before changing the oil helps to warm up the oil, making it easier to pump out.
  • Using a plastic bag to collect oil from the old filter helps to prevent a mess in the engine bay.
  • Be cautious when applying oil to the gasket to avoid over-tightening the new oil filter.
  • Ensure you do not overfill the engine with oil to prevent potential engine damage.

Which part do I need for my Yanmar 3HM35F?

For most 3HM35F owners the part above (18-7917) is the right choice. Price tip: the aftermarket numbers are usually noticeably cheaper than the OEM-branded box — it is the same physical part. If you need an exact match, these compatible part numbers also fit:

Show all compatible part numbers (9)
Part number Description
Westerbeke 21235 Oil filter Find on Amazon →
Yanmar 119350-35150 Oil filter Find on Amazon →
Yanmar 119350-35151 Oil filter Find on Amazon →
Yanmar 124450-35100 Oil filter Find on Amazon →
Yanmar 124450-35110 Oil filter Find on Amazon →
Yanmar 124550-35110 Oil filter Find on Amazon →
Yanmar 171056-35110 Oil filter Find on Amazon →
Yanner 124085-35113 Oil filter Find on Amazon →
Yanner 171056-35111 Oil filter Find on Amazon →

Many of these are the same physical part under different brand numbers. Confirm against your engine plate before ordering.

Frequently asked questions

What oil filter fits a Yanmar 3HM35F?

The Yanmar 3HM35F uses the oil filter sold as 18-7917, plus its OEM and aftermarket cross-references (9 compatible numbers are listed above). Confirm the number against your engine's model code and year plate before ordering.

How often should I replace the oil filter on a Yanmar 3HM35F?

Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).

What else do I need for an oil change on a Yanmar 3HM35F?

The correct grade and amount of engine oil (see the manual or the video), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.

What are the signs the oil is overdue on a Yanmar 3HM35F?

Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.

How long does an oil change take on a Yanmar 3HM35F?

About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.

Ready to fix it?
Get the 18-7917 oil filter for your Yanmar 3HM35F.

Check today’s price on Amazon →

Own a Yanmar?
See what your boat is actually worth — instant AI valuation based on thousands of comparable European sales.

Get your free valuation →

Related guides

As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.