Yanmar 3JH40 Oil & Filter Change
Fresh oil and a new filter are the cheapest insurance for your Yanmar 3JH40. Below is the oil filter we recommend, which 3JH40 variants it fits, a step-by-step video of the full oil change, and what else you need for the job.
Check today’s price on Amazon →
Watch: how to do it (step by step)
How to replace the oil filter on a Yanmar 3JH40
How to Change the Oil and Gauze Filter on a Yanmar L48N Engine | L&S Engineers
Tools Needed
- 17mm spanner
- 10mm spanner
- Pliers
Safety
- Ensure the engine is cool before starting any work.
- Be cautious when handling oil to avoid spills.
Steps
- Unscrew the oil fill cap to check the oil level.
- If the oil level is below the suggested mark, top it up with the correct oil for your engine.
- To change the oil, unscrew the 70ml oil drain plug using a 17mm spanner.
- Allow the engine oil to drain completely.
- Inspect the drain plug seal and replace it if necessary.
- Screw the drain plug back in securely to prevent leaks.
- Unscrew the 10mm bolt that holds the gauze filter using a 10mm spanner.
- Remove the gauze filter using pliers.
- Inspect the gauze filter for any debris or blockages.
- Check the seals on the gauze filter for any wear or damage.
- If the seals are damaged, replace the gauze filter.
- Place the gauze filter back into the engine.
- Screw the gauze filter back into position.
- Tighten the 10mm bolt to ensure there is no movement.
Tips
- Use the right oil for your engine.
- Fill the oil responsibly to avoid overfilling.
- Inspect the seals regularly to prevent leaks.
Which part do I need for my Yanmar 3JH40?
For most 3JH40 owners the part above (YAN119305-35170) is the right choice.
Frequently asked questions
What oil filter fits a Yanmar 3JH40?
The Yanmar 3JH40 uses the oil filter sold as 119305-35170. Confirm the number against your engine's model code and year plate before ordering.
How often should I replace the oil filter on a Yanmar 3JH40?
Change the oil and filter every 100 running hours or once a season, whichever comes first (check your manual for the exact interval).
What else do I need for an oil change on a Yanmar 3JH40?
The correct grade and amount of engine oil (see the manual), a new drain-plug washer, a filter wrench and a drain pan or oil extractor pump. Nothing exotic — it is standard service equipment.
What are the signs the oil is overdue on a Yanmar 3JH40?
Dark, gritty oil well past its interval, low-pressure warnings — and milky or grey oil, which means water is getting in and should be investigated immediately.
How long does an oil change take on a Yanmar 3JH40?
About an hour for a competent DIYer. Run the engine warm first — warm oil drains faster and carries more contaminants out with it.
Related guides
- Yanmar 3HM35 oil filter
- Yanmar 3HM35F oil filter
- Yanmar 2GM20 oil filter
- Yanmar 2QM15 oil filter
- All Yanmar maintenance guides
- Free Yanmar boat valuation
- Buying a boat? Check whether the asking price is fair
As an Amazon Associate we earn from qualifying purchases — at no extra cost to you. Prices and availability are shown at checkout. This guide is for reference; always follow the engine manufacturer’s service manual.